What’s the difference between the Series 862 and Series 892 foot switches?
The main difference is the cover hinge placement. The Series 892 hinge is near the back; the Series 862 hinge is near the front. Both are priced the same. The Series 862 offers an ergonomic advantage with its front hinge, while the Series 892 has a more traditional design. Often, it comes down to personal preference.
How do the Series 863 and Series 893 foot switches differ?
The Series 863 features a durable cast iron base and cover, while the Series 893 uses a die-cast zinc cover with a steel base. The 893 is a more economical option where cast iron housing isn’t necessary. Both have identical electrical ratings and dimensions.
What do your foot switch part numbers mean?
Part numbers follow a pattern, with the first three digits representing the Series number, which groups foot switches with similar housing or components. The remaining numbers indicate the model’s action, electrical rating, and cord assembly. Keep your part number handy if you need support.
What are the common cord types for foot switches? What does “18/3 SJT” mean?
“18/3 SJT” breaks down as follows: “18” is the gauge (thickness), “3” is the number of conductors, and “SJT” is the jacket material. Common UL-approved jacket types include SJT, SJO, SO, and SOW.
Why do switches without cords have higher electrical ratings than those with cords?
The electrical rating reflects the lowest-rated component inside the foot switch—either the snap switch, cord, or plug. For example, if the internal switch rates 15 Amps but the cord rates 10 Amps, the rating will show 10 Amps. This is why cordless switches often have higher ratings.
Installation, Repair, Returns, Shipping & Delivery
How do I open a foot switch to install a cord?
Series 862, 892, 863, 893: Remove one hinge screw with the appropriate Allen wrench to slide the cover off.
Series 210, 220: Remove the bottom cover plate using a Phillips screwdriver.
Series 211: Remove the front cover plate using a 9/64" Allen wrench.
How does a maintained foot switch work compared to a momentary switch?
(Reference Series 862) The maintained switch requires firm pressure on the toe-side to snap "ON," held by a clip. It stays ON until you press the heel-side firmly to turn it OFF. If it doesn’t snap, apply more pressure.
What is your return policy and warranty? What about shipping?
We do not have a standard return policy or warranty due to product variety. Defective or non-working items are handled case-by-case—contact us directly. Orders ship FOB Putnam, CT via UPS, FedEx, or USPS within 1-2 weeks depending on stock. Expedited shipping is available at extra cost.
How long do ConnTrol foot switches last? How are they tested?
Standard foot switches are tested for over 2 million mechanical cycles. Electrical component life varies by use. Cables and snap switches typically wear out before housing. Replacement kits and cords are available for most models.
Rating Systems & Certifications
What does the UL symbol mean?
Underwriters Laboratories (UL) is an independent safety testing and certification organization. Visit ul.com for more info.
What are NEMA ratings?
NEMA (National Electrical Manufacturers Association) promotes safety and standards for electrical products. See nema.org for details. Our foot switches reference NEMA Standards Publication 250-1997.
What are IEC IP ratings?
IEC (International Electrotechnical Commission) defines IP (Ingress Protection) ratings for enclosure protection levels. Visit iec.ch for specifics. UL’s IP Code reference page explains ratings in detail.
What does "Made in U.S.A" mean?
This means "all or virtually all" of the product is made in the U.S., as defined by the Federal Trade Commission (FTC). Learn more at ftc.gov.
